Kohler Engine

Command Pro  14hp  18hp  25hp  30hp  40hp

Command 14 hp

This gasoline engine features a 4-cycle, slant cylinder design, with a cast iron cylinder bore and overhead valve for easy access. The Quad-Clean^TM 4-stage air filtration system ensures only clean air enters the engine for maximum power and life of the engine.

CH440 14HP Horizontal Shaft

		Four-cycle Overhead Valves Cast Iron cylinder liners Aluminum Block Quad Clean Dual Oil Drains Carburetor bowl drain $750.00
Model: CH440 Command Pro
Air Cleaner: All Season
Fuel Tank: Standard
Muffler: Standard
Shipping Weight: 87 lbs
Starter: Recoil + Electric

User-Friendly. Interference free PTO face provides flexibility to power any application without modification to the equipment. Dual oil fills and drains and easy access throttle, choke and shutoff make operating and maintaining this engine a breeze.

Durable, Long Life Design. Features steel-forged crankshaft, cast iron cylinder bore, tough Stellite® faced exhaust valve with Tuftride® coated stems and dual ball bearings for maximum side load characteristics. Also, the Quad-Clean^TM four-stage cyclonic air filtration system ensures only the cleanest air is entering the engine, maximizing engine power and life.

Increased Efficiency. The KOHLER advanced ignition system reduces fuel consumption , while the large capacity fuel tank allows for longer runs between fill-ups. Combined, these two features will save you time and money.

Comfortable Operation. A fully integrated system, including oversized muffler, sound-deadening alloy crankcase and silenced air intake provide smoother, quieter performance.

Reliable Starting. In colder months the Quad-Clean^TM air filter cover can be reconfigured, no tools required and in a matter of seconds, to recycle engine heat. Along with the advanced electronic ignition, automatic compression release, and dual ball bearings the Command PRO® provides effortless starts in all weather and conditions.

Command 18 hp

This v-twin cylinder, air-cooled, horizontal-shaft engine is built to last. OHV, cast iron cylinder liners, and aluminum block construction make the 4-cycle, gasoline-powered Command PRO® ready for the long haul.

CH18 18HP Horizontal Shaft

		Four-cycle Overhead Valves Cast Iron cylinder liners Aluminum Block Dual oil drains Hydraulic valve lifters Oil cooler Two-barrel carburetor $1299.00 *
Model: CH18 Command Pro
Crankshaft: (L) 4" (D) 1.125" (T) 7/16 x 20 (K) 1/4" Full
Air Cleaner: Dual Element
Air Filter: 47 083 03-S
Muffler: None*
Shipping Weight: 106 lbs
Starter: Electric

*Special side mount muffler and side mount manifold - $260.00

User-Friendly. Top-mounted, quick change oil filter is easy to reach and since most of the oil is drained before removal, there's no mess to clean up. Removeable cylinder covers require only one tool and provide access to the entire cylinder for thorough cleaning.

High Power Performance. Overhead valve technology provides greater volumetric efficiency and a higher compression ratio. This produces more power, improved fuel economy and cooling and reduces oil consumption. In addition, there is virtually no carbon buildup, reducing overall maintenance costs. The variable speed, mechanical governor promises smooth performance, regardless of application or fluctuating demands for power.

Durable, Long Life Design. Hydraulic valve lifters are oil pressurized, ensuring that push rods stay in constant contact with the rocker arms. Requiring no adjustment, the valve train is virtually maintenance-free. In addition, full-pressure lubrication delivers continuous lube to critical engine components, even at 25-degree angle of operation and optional oil cooler regulates the oil temperature extending oil-change intervals. Large capacity, in-line fuel filter provides extra protection against dirt particles that can clog fuel lines.

Command 25 hp

This v-twin cylinder, air-cooled, horizontal-shaft engine is built to last. OHV, cast iron cylinder liners, and aluminum block construction make the 4-cycle, gasoline-powered Command PRO® ready for the long haul.

CH730 25HP Horizontal Shaft

		Four-cycle Overhead Valves Cast Iron cylinder liners Aluminum Block Dual oil drains Hydraulic valve lifters Oil cooler Two-barrel carburetor $1649.00 *
Model: CH730 Command Pro
Crankshaft: (L) 4.543" (D) 1-7/16" (T) 7/16"-20 (K) 1/4" Full
Air Cleaner: Dual Element
Air Filter: 25 083 03-S
Muffler: None*
Shipping Weight: 108 lbs
Starter: Electric

*Special side mount muffler and side mount manifold - $260.00

User-Friendly. Top-mounted, quick change oil filter is easy to reach and since most of the oil is drained before removal, there's no mess to clean up. Removeable cylinder covers require only one tool and provide access to the entire cylinder for thorough cleaning.

High Power Performance. Overhead valve technology provides greater volumetric efficiency and a higher compression ratio. This produces more power, improved fuel economy and cooling and reduces oil consumption. In addition, there is virtually no carbon buildup, reducing overall maintenance costs. The variable speed, mechanical governor promises smooth performance, regardless of application or fluctuating demands for power.

Durable, Long Life Design. Hydraulic valve lifters are oil pressurized, ensuring that push rods stay in constant contact with the rocker arms. Requiring no adjustment, the valve train is virtually maintenance-free. In addition, full-pressure lubrication delivers continuous lube to critical engine components, even at 25-degree angle of operation and optional oil cooler regulates the oil temperature extending oil-change intervals. Large capacity, in-line fuel filter provides extra protection against dirt particles that can clog fuel lines.

Command Pro 30 hp

This v-twin cylinder, air-cooled, horizontal-shaft engine is built to last. OHV, cast iron cylinder liners, and aluminum block construction make the 4-cycle, gasoline-powered Command PRO® ready for the long haul.

CH750S 30HP Horizontal Shaft

		Four-cycle Overhead Valves Cast Iron cylinder liners Aluminum Block Dual oil drains Hydraulic valve lifters Oil cooler Two-barrel carburetor $1899.00 *
Model: CH750S Command Pro
Crankshaft: (L) 4" (D) 1-1/8" (T) 7/16"-20
Air Cleaner: Heavy Duty
Air Filter: 25 083 01-S
Muffler: None*
Shipping Weight: 108 lbs
Starter: Electric

*Special side mount muffler and side mount manifold - $260.00

User-Friendly. Top-mounted, quick change oil filter is easy to reach and since most of the oil is drained before removal, there's no mess to clean up. Removeable cylinder covers require only one tool and provide access to the entire cylinder for thorough cleaning.

High Power Performance. Overhead valve technology provides greater volumetric efficiency and a higher compression ratio. This produces more power, improved fuel economy and cooling and reduces oil consumption. In addition, there is virtually no carbon buildup, reducing overall maintenance costs. The variable speed, mechanical governor promises smooth performance, regardless of application or fluctuating demands for power.

Durable, Long Life Design. Hydraulic valve lifters are oil pressurized, ensuring that push rods stay in constant contact with the rocker arms. Requiring no adjustment, the valve train is virtually maintenance-free. In addition, full-pressure lubrication delivers continuous lube to critical engine components, and integrated oil cooler is mounted under the cylinder cover for a compact engine profile and superior cooling. Large capacity, in-line fuel filter provides extra protection against dirt particles that can clog fuel lines.

Command Pro 40 hp

This v-twin cylinder, air-cooled, 40 hp horizontal-shaft engine is built to last. OHV, cast iron cylinder liners, and aluminum block construction make the 4-cycle, gasoline-powered Command PRO® ready for the long haul.

CH1000 40HP Horizontal Shaft

		Four-cycle Overhead Valves Cast Iron cylinder liners Aluminum Block Top Mount Oil Filter Hydraulic valve lifters Nylon Cam Gear Two-barrel carburetor $2699.00 *

User-Friendly. Top-mounted, quick change oil filter is easy to reach and since most of the oil is drained before removal, there's no mess to clean up. Removeable cylinder covers require only one tool and provide access to the entire cylinder for thorough cleaning.

High Power Performance. Overhead valve technology provides greater volumetric efficiency and a higher compression ratio. This produces more power, improved fuel economy and cooling and reduces oil consumption. In addition, there is virtually no carbon buildup, reducing overall maintenance costs. The variable speed, mechanical governor promises smooth performance, regardless of application or fluctuating demands for power.

Durable, Long Life Design. Hydraulic valve lifters are oil pressurized, ensuring that push rods stay in constant contact with the rocker arms. Requiring no adjustment, the valve train is virtually maintenance-free. In addition, full-pressure lubrication delivers continuous lube to critical engine components, and integrated oil cooler is mounted under the cylinder cover for a compact engine profile and superior cooling. Large capacity, in-line fuel filter provides extra protection against dirt particles that can clog fuel lines.

Reduction Drive for Engines

Click Here

You may call us at (405) 279-3833 to place an order, fax us at (405) 279-2377, or send us an e-mail with all the requested information.